Mid Century Bath Demo

This is the second post on this design job for this Mid Century Bathroom design. You can read about it in this post.

So almost all the new components are purchased and on site. Demo has begun on the shower area.

image

It was fairly easily to start the tile removal on the sides of the shower. We didn’t want any serious damage to the dry way in this area.

image

Here the tiles are all removed. No rot of water damage at all.

image

Now we are going strong. All the drywall is removed around tub to the studs. So the cement “Hardibacker” pieces can be installed. When tearing out the niche and cabinet it opened up this area behind the tub. This will be sealed off for now, and the next big project will be the second bathroom. This space will be opened on the other side to enlarge the space in a new tiled shower.

image

We did however find some old damage to the subfloor around the toilet. It wasn’t  really bad but had warped the particle board. The homeowner opted to rip it out and replace it. It will have more Hardibacker installed for the new tile floor. There is also a hole where the toilet paper dispenser had been mounted into the wall. This will need patching.

image

This is area will need drywall repair where the old backsplash was installed, the walled cleaned, primed, and painted.

The young homeowner are excited to work on part of this project. They kept the accent tiles from inside the shower. There were just 4 total.

imageThey will turn them into coasters for the house. This will be a fun way to remember their first house remodel.

image

This is project should move pretty fast. I hope you don’t mind the detailed updates……..

Hugs,

image

Advertisements

Re-design of a Mid Century Bathroom

imageSo this is a design job for a Mid Century Bathroom. 1968 to be exact. This young couple just bought their first home and are faced with the main bathroom stuck back in the past. Not only components of the 60’s but some upgrades from the early 90’s as well. They want to honor the design but need a second shower to make this functional.

image

For some odd reason there is a niche and cupboard above the tub that you can only use if you are standing in the tub. Everything seems solid, but we need to gut the shower to make it ready for the new tile around the tub and install plumbing to create the shower head.

It has been a process to help them decide on the choices of materials for this update. They needed to pick out tile for shower surround, floor tile, new vanity, paint, counter and sink, lighting and faucets. As with any young couple they want  it to look like a dream photo they have found but with the budget, cannot have the amount or certain materials that they want. It is all about compromise.

I put together some samples after talking with them about their likes and colors. What I got from them was dark cabinet, mosaic tile behind a free-standing or stand alone vanity.  Nickel or pewter colored fixtures, tub to ceiling tile with inset of mosaic tile, dark wood look ceramic floor. Paint that could match all the existing house that the interior has recently been painted. And possibly tiled wainscoting. All this on a rather small budget for materials and labor.

Tub surround, subway which was requested. In almond not white.

Tub surround, subway which was requested. In almond not white.

Mosaic, subway and floor tile in wood look.

Mosaic, subway and floor tile in wood look.

Vanity request, with open shelves for baskets.

Vanity request, with open shelves for baskets.

image

image

After presenting them with photos, samples and cost or materials and labor. Changes happened to get closer to budget and what they really wanted. I eliminated the ceiling lights and wainscoting right off, knowing that the budget wouldn’t support that.

It was decided to eliminate the entire wall being mosaic tile behind the vanity, changed the subway tile surround to a smaller connected tile at a greatly reduced price but still achieve the desired look. Add a larger vanity when presented with photos of one. Also add a feature wall behind vanity with a different paint color, and additionally may add some mosaics above vanity when it gets closer to the finish.

The toilet is newer so it will be reset. Also the client will do the shower demo himself which has begun.

It is fun to see them shopping for materials and changing their minds after seeing different materials when we went to purchase the components.

updates will be coming…….

Hugs,

image

Design Job and a Road Trip

Ok a quick post. I know I’ve been absent as of late. Kitchen posts are coming.

I promise.

So one of my building girlfriends came for the weekend to help me! I had a ton of projects that were falling behind. Not just furniture, and remodel projects. This darn Frozen shoulder is coming along. Going to the pool seems to be helping in a big way. Sorry back to my girlfriend.

Well, the shed is almost done! Yippee. We recycled some siding to enclose it, used a recycled window also it in! Then got the mover and other stuff temporarily stored in there for now.

I love using all the materials that I have stored here! We did 2 projects and didn’t buy one thing! I’m feeling pretty clever right now that my hoarding recycling has paid off now.

We worked on the inside of the Chicken coop too. Did some weather/ varmit proofing.

We also had picnics on the back deck in the warm sunny weather. Seriously the end of January and we had better weather than we get in the Summer or Fall! Built a fire and cleaned up some yard clipping, and scrap wood. We also sat around after dark and drank some wine! Gee I felt like I was on vacation!

image

This is Mr. Nostalgia with some onlookers while he eats his chicken. Hard to eat Chicken when you have 3 little fur babies looking at you!

Yesterday we went to my good friend Franks house. I sold my table saw and he graciously offer me use of his when needed. So my girlfriend and I loaded our Table saw projects and headed over.

image

Here is the two of them working on the planer.

So today we head off on a road trip. I’m hitching a ride to the big city to pick up a car, and do a design job.

So I have lots to share coming up. If your interested you can check out my Instagram, or Facebook.

Hugs,

image

Upper Cabinet Installation

So we left off with the walls being done at this point. Click here to see the wall post. So since the cabinet maker had the shells of the uppers done, and I had finished painting the uppers will get installed before the lowers.

I guess I should give you a little back story.  This part of a kitchen remodel is “compromise” yes that is the name of the game. You have a mental photo or dream in your head for the space. But in all actuality it will look very close but you will have to compromise at some point in the details. This might be due to budget, or unforeseen problem your space will throw at you. This could be a major wiring in the way, to support beams, and sometimes just a few inches can make or break an idea or plan.

image

So far I’ve had two compromises. The first was the old panty area, which now will hold the supersized refridgerator.  Then due to this it would have been major problem to remove the soffits, so they remained and we even have to change them up and extend them.

image

Here the soffit is already altered. The corner cabinet, and vintage inspired curved shelves were on my list! The other side was to either have a matching curved shelf or not one at all and the wall completely tiled.

image

Then I lost my open shelf and wall concept above the range and to the sides. To the right one open shelf was to house the microwave, since things shifted to the left and right something in the center had to go, and it was the microwave shelf. Now the range hood is to be built in and become a focal point structure. Which is now looking pretty slim of becoming a reality.

image

So the new cabinet has bead board  in the back. This is due to the fact it will have glass doors and contain dishes.

So we are on a roll. No shelves and have install the doors. But it’s looking more like a kitchen everyday.

The next step the kitchen sink!

Hugs,

image

A Chicken Coop

So I do have a New Year word it is “Change” and you can read about it in this post.

I am also in the process of making a list of those changes. I do know one of them is to complete this chicken coop! It has been under construction for the better part of 3 years! I’m placing it on the list again in hopes it will finally make it to the completed list this year.

I grew up with Chickens. I had Chickens when my kids grew up. I think I even have photo of the kids with chicks watching TV, in pet parades, and helping with the gardening.

When we bought this house and started to remodel it, and retake the over grown landscape I knew I wanted to have Chickens again. It started with the oldest son giving me some sides to a rather large crate that a piece of equipment had arrived at his work in. I managed to get one side pried apart and the boards off of the timber parts. It was a stubborn job. So I decided I would just use the pieces as the floor of the coop, and porch of the coop.

From here I framed the coop. I think it went through one winter with a floor and framed sides!

image

The next year it got it roof framed and galvanized metal roof on the coop and the porch. It also had its great old window installed and salvaged door.

image

Then when I was away one long weekend I came home to it having plywood On its sides. It also had a welcome chicken sign on the door!

image

This of course is still far from being finished. It isn’t varmint proofed, and doesn’t have its Chicken door put in yet, pen built or the interior done.  One day my “helper” had the idea of using some hand split cedar shakes to cover the front   and side. So one day  I came home to this.

image

My little “Cottage” Chicken Coop looks a bit more like a “Miners” Coop now, but that’s ok it is cute too! This is pretty much where it has stopped. Other projects have moved up the list, and once again the Coop, with the chickens has been bumped down.

image

I did get it cleaned up since this shot. And now it gets put once again on the todo/finish list 2014!

🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓🐓

Hugs,

image

 

image

image

Kitchen Walls

So before we can move forward on installing the new custom cabinets, work on the existing walls needed to be done. Yeah another step in the right direction!

image

So after the carpenter Frank installed a false wall to hide the wires I didn’t want to pay to have moved, there was the job of reworking and adding to the soffit, make the new angle the corner, and extend the end.

image

This was all a compromise on my part as I did not want a soffit at all. I wanted it all ripped out, finished off the ceiling, and the tops of the cabinets exposed for display. But I’m keeping the cost pretty low on this kitchen, I know it may not seem so with my sink choice or custom cabinets. But truth be told the sink was a splurge. But my cabinet maker gave me a screaming good deal, and I could not have bought the right sized cabinets for this kitchen anyway.

Examples of some of the cabinets I looked at that were pre-made. I like the one in the center with the bead board inserts.

Examples of some of the cabinets I looked at that were pre-made. I like the one in the center with the bead board inserts.

And this kitchen is very small when you consider the cabinet area. Plus I built the island and the pantry is in the adjoining room. (It is being re-done) So it was a no brainer!

image

Here the uppers are removed, the soffit extended and reworked. All ready for texture so it matches the existing work in the house.

image

Now once this dried I got busy painting it all. The whole great room was to be painted. This corner is the kitchen, to the left is the dining area, and I’m standing in the living area.

I went to Lowes, and for the first time in my interior design life, choose 3 paint colors all from the same paint chip card! I must say I’m not sure if I was just tired, or it just worked that day. I Chose Valspar  Signature. Card 3008-10. It has the 3 tones on the one card ranges from a darker tone, midtone, and then the lightest.

This is the beat up paint chip card I carry in my purse, so when I need to match or mix paint I have it with me.

This is the beat up paint chip card I carry in my purse, so when I need to match or mix paint I have it with me.

I had painted the interior of the house after we moved in. The big feature wall was a darker beige color, and the other 3 walls were a soft cream color. At that point anything was good. The walls were all a pink color, and the kitchen cabinets were 2 toned. The bottom plum, and the uppers lavender!

The thing I learned first about painting when living near the ocean, is color changes color. The color you pick out, and paint color you end up with may not necessarily be what you had envisioned after it is applied. And certainly not during certain times of day. Something magical happens when you paint near the ocean, I can’t explain it, but I have encountered it several times, and have discussed this with others who have encountered this very phenomenon.

I must say when I started on the feature wall, I was prepared to paint at least 2 coats. I had washed the walls from the mishap with the smoke and soot with a TSP solution and a special sponge, but there were still streaks and discoloration to deal with.

image

This color went right over the darker color not only easily, but covered in one coat! I wasn’t sure until it dried, but sure enough! WOW! I’ve used a lot of paint over the years, and still have various cans and brands around that I will refer to on this blog, but none of them will get glowing remarks from me as this will! It will be my go-to paint from now on, and I’m not getting paid to say that either. Oh by the way, I would love to get paid to say that! I will never, ever say that I like a product unless I truely believe in it!

image

Here is the feature wall. It is a Historic Preservation color and the darkest color.

The other 3 walls in this great room consist of one wall with a large window, and the other two wall are chopped up with doorways, and the kitchen area. They needed to be lighter in color so the middle color on the card seemed to work real well with the overall theme.

image

Im not sure about you, but I always thought my dream job would be part of the group that picks names for paint colors. I’m sure it is an awful job if you think about it. How many names can you come up with for beige, or white?

Speaking of white, I had always used Dutch Boy Sweetened White for all my trim in a Semi-gloss. But as you can guess not anymore. Which leads me to the cabinet color I chose.

It needed to be whitish, but not all in your face screaming, blinding white. That’s where the third color comes in from the paint chip card.

image

As you can see, it really isn’t white at all, but remember the magic that happens with paint. When you open this gallon of paint it looks white. Just not the glaring, awful in your face white I didn’t want. This can was used for the soffit, and then delivered to the cabinet maker. The great thing about this color is it has replaced my Sweetened White as my go to trim color.

Its coming along, I’m excited about the next step. The lower cabinets will be torn out, prep work done then the installation of the new cabinets. Oh and that large farm house sink!

This I’m sure will be the hardest part, and the most trying part of a renovation. Pretty much several days without a functioning kitchen.

Hugs,

image

New Kitchen Island

So we started the island if you remember from this post here.

So now that the floor is done on the part where the new island will be we can install and finish it.

It looked like this as we placed it in the house.

image

Ran the wire up into it and secured it in place. Then connect it all together and put on the backing bead board. You can see it doesn’t line up with the green tape on the floor. The front has a toe kick that needs to be brought out to make it a solid piece. This will give it the illusion of a piece of furniture, or in this case the old general store counter appearance we are looking for. This was achieved by using 2×4 spacer pieces and one long 2×4 the length of the counter. The trim will hide all of this work.

image

image

Here you can see the trim along the floor. I pre-painted it so it will just need to be touched up once it was nailed into place. You can see the poplar strips added to give it the antique look.

image

This is the other end with the opening for the built in microwave. you can see the wires there for the dedicated line for it. The microwave was suppose to be on a special shelf between the range and fridge, but due to having to allow extra space for the custom corner cabinet we lost space and had to move it. I’m not a big fan on them on the counter. This made sense and would allow a opening for it.

I wanted the doors to be different on this piece than the bead board doors I selected on the cabinets. The pieces had a raised Shaker style doors, so I had a recessed area to work with. I got the brilliant idea to use old ceiling tin on them. I looked and found some online, but they were what I thought pretty expensive. So I figured why not use the fake plastic stuff. A trip to Home Depot, provided me with just what I was looking for.

image

It is PVC and looks like tin ceiling tile, but is made to be used as back splash and has grooves to overlap and pieces to finish off the edges. You can order online if they don’t have the color you want in stock and delivered to your local store. It will be in the kitchen decor/remodel department.  I wanted my doors to match pattern wise so had to use a full sheet for each of the 3 door on the island. It seems a little expensive, but not when compared to original antique pieces if you can find them to fit your cabinets. I think they could be primed and painted too?

image

I measure the door inserts and marked the panels.

image

I then simply cut them with my kitchen scissors. They fit tightly into the insert area. I used liquid nails and put 5 dots on the door area, staying away from the immediate edge so it wouldn’t squeeze out the sides and show. I  then pressed the PVC  Tin Tile piece into the area and rubbed well. I let lay flat for a day and dry.

image

I attached the new hinges and hung them. I had selected the hardware for the new cabinets and couldn’t find anything I liked better so did use the same hardware on the island.

30mm Victorian Glass Knob, and Martha Stewart 3" Bracket Bin Pull in Iron.

30mm Victorian Glass Knob, and Martha Stewart 3″ Bracket Bin Pull in Iron.

The glass knobs are just under $3.99 each. I did get the iron bin pulls for $1.98, they sell now for $4.97.

They didn’t show very well on the black painted island so I took a silver paint pen and rubbed it on them, quickly followed by rubbing with a rag to spread it and get it into grooves.

image

The top is going to be butcher block. I found one at IKEA that is perfect. They sell counters that are a narrower width, but also a piece that is a wider width. Problem is the nearest IKEA is about 3 1/2 hours from us so we need to wait until someone is going that direction that can haul it! So until that happened we made do.

image

This is before the hardware and distressing. I sanded, then stained, and waxed to give it and old used feel. If I would have know about milk paint then, it would of been milk painted with some chipping goodness! However it turned out good, and even people who love antiques think I “found” my old store counter and converted it! We finally got the top, the cabinet maker cut it down to fit. It was wired with an outlet at both ends and one inside on a separate circuit for the microwave. I tested several stains and found one that matched the Red Oak that is on the floor on 2 sides of it. And used a natural Bees Wax to seal it. It gets a good cleaning sanding and re-waxing about every 6 months.

image

While on my trip to see my son, (here) I purchased a few things at IKEA. I installed them on the island to give it more of that general store look and also some practical storage solutions too.

image

And a view of the microwave end too.

image

Here you can see the distressing also. Just were it would be worn perhaps from customers rubbing against it while talking to the shop owner, or from being moved or cleaned over the years. I love it. It is functional and looks great too. Plus I like the fact I can say “yeah I built it” ( insert big smile).

If you have hung on long enough to read this whole post thank you! Sorry about the quality of the photos. There was no lighting installed in here when most of these were taken. Also before my new camera purchase. (Yeah)

So more to come, the lower cabinets are next, and another great repurpose project too.

Hugs,

image

 

image

image